• SIL 2 / SC 3
• Input from Zone 0/Div. 1
• Installation in Zone 2/Div. 2
• mV, TC, 2/3/4wire res./RTD or potentiometer input
• Duplication/inversion/scaling/custom output
• Selectable CJC: int. PT1000, external RTD or fixed
• Burnout/internal/cjc/in sensor fault monitor
• Alarm output with user-settable trip points
• Modbus RTU RS-485 for monitor & configuration
• Fully programmable operating parameters
• High Accuracy, µP controlled A/D converter
• Three port isolation, Input/Output/Supply
• 
  
• High Density, two channels per unit (D5072D)
• D5072D can configure as Duplicator

I.S. SIL2 Resistance Repeater

• 
  
  • SIL 2 / SC 3
  • Input from Zone 0/Div. 1
  • Installation in Zone 2/Div. 2
  • 2/3/4wire res./RTD or potentiometer input
  • Burnout Fault detection
  • Fully programmable operating parameters
  • High Accuracy
  • Three port isolation, Input/Output/Supply
  • 
    
  • High Density, two channels  (D5072D-087)
  • 
    D5072D-087 can configure as Duplicator

Duplicator

• SIL 2 / SC 3
• Input from Zone 0/Div. 1
• Installation in Zone 2/Div. 2
• mV or thermocouple input
• Output duplication
• Fully programmable operating parameters
• High Accuracy, µP controlled A/D converter
• Three port isolation, Input/Output/Supply
• 
  
• High Density, two channels per unit (D5072D-096)

I.S. SIL2 Sink-Out Temperature Converter

• SIL 2 / SC 3
• Input from Zone 0/Div. 1
• Installation in Zone 2/Div. 2
• mV, TC, 2/3/4wire res./RTD or potentiometer input
• Duplication/inversion/scaling/custom output
• Selectable CJC: int. PT1000, external RTD or fixed
• Burnout/internal/cjc/in sensor fault monitor
• Alarm output with user-settable trip points
• Modbus RTU RS-485 for monitor & configuration
• Fully programmable operating parameters
• High Accuracy, µP controlled A/D converter
• Three port isolation, Input/Output/Supply
• High Density, two channels per unit (D5072D-099)
• 
  

Duplicator

• SIL 2 / SC 3
• Input from Zone 0/Div. 1
• Installation in Zone 2/Div. 2
• mV, TC, 2/3/4wire res./RTD or potentiometer input
• Two independent Trip Amplifiers (SPDT relay contacts)
• Inversion/scaling/custom output
• Selectable CJC: internal PT1000, external RTD or fixed
• Burnout/internal/cjc/in sensor fault monitor
• Alarm output with user-settable trip points
• Modbus RTU RS-485 for monitor & configuration
• Fully programmable operating parameters
• High Accuracy, µP controlled A/D converter
• Three port isolation, Input/Output/Supply

• SIL 2 / SC 2 (pending)
• Input from Zone 0/Div. 1
• Installation in Zone 2/Div. 2
• mV, TC, 2/3/4wire res./RTD or potentiometer input
• Two independent Trip Amplifiers (SPDT relay contacts)
• Inversion/scaling/custom output
• Selectable CJC: internal PT1000, external RTD or fixed
• Burnout fault monitor
• Alarm output with user-settable trip points
• Zero/span output current trimmers
• Extended power supply for 12/24 Vdc nominal voltage
• Fully programmable operating parameters
• High Accuracy, µP controlled A/D converter
• Three port isolation, Input/Output/Supply

• SIL 2 / SC 3
• Input from Zone 0 / Division 1
• Installation in Zone 2 / Division 2
• Loop disconnection to ease maintenance operations
• Programmable fault in case of burnout or threshold exceeding
• mV, TC, 2/3/4-wire resistance/RTD or potentiometer input
• Inversion/scaling/custom output current
• Mechanical polarization key to prevent destructive mismatches
• Fully programmable through Gateway
• High Accuracy
• Three port isolation, Input/Output/Supply