Genesis™ Models ED1 & ED2 Multiphase Detectors

Genesis™ 모델 ED1 및 ED2 Detector는 TDR 기반의 24VDC 레벨 검출기로, 인터페이스 레벨 측정 애플리케이션에서 다양한 층의 레벨을 정확하게 검출하도록 설계되었습니다. 여러 중요한 엔지니어링 성과를 담고 있는 최첨단 레벨 검출기는 기존의 많은 기술보다 훨씬 뛰어난 측정 성능을 제공하도록 설계되었습니다.

Genesis 모델은 두껍고 유동적인 에멀젼 층이 있는 응용 분야에서 여러 단계를 측정하도록 설계되었습니다.

• 기체상 (탱크 크기 기준) 
• 총량 (예: 탄화수소 액체)
• 유화층 상단
• 유화층 하단 (예: 수면)
•  침전물
  
  
  
  
  

• 24VDC 인터페이스 검출기로, 상단 레벨, 에멀젼 상단, 수위 및 침전물 레벨을 편리하게 제어할 수 있는 4개의 4-20mA 출력 단자를 제공합니다.
• 탑다운 및 바텀업 신호를 동시에 생성합니다.
• 매체 특성 변화에도 레벨 측정에 영향을 받지 않습니다.
• 용기 내 레벨 교정, 변경이 필요 없습니다.
•  4 버튼키패드와 그래픽 LCD를 통해 구성 매개변수 및 성능 곡선을 확인할 수 있습니다. 
• 유지보수 일정을 계획하고 예기치 않은 가동 중단을 최소화하는 사전 진단 기능을 제공합니다.
• 물리적 가동 부품이 없어 측정 오류 및 가동 중지 시간을 줄입니다. 
• 상단에 장착된 하나의 연결 센서를 통해 4개의 레벨을 감지합니다. 
• 센서 설계는 최대 +200°C / 70bar까지 사용 가능합니다. 
• 신호 해석을 위한 독자적이고 혁신적인 소프트웨어 알고리즘을 탑재했습니다.

E4 Modulevel® liquid level transmitter

The E4 Modulevel® is a loop powered, two-wire instrument, utilizing simple buoyancy principles to detect and convert liquid level changes into a stable output signal. The linkage between the level sensing element and output electronics provides a purely mechanical design and construction. The vertical in-line design of the transmitter results in low instrument weight and simplified installation. The instrument comes in a variety of configurations and pressure ratings for varied applications.

The E4 Modulevel has microprocessor based electronics with 4–20 mA/HART® digital output. E4 supports the FDT/DTM standard and a PACTware™ PC software package allows for additional configuration, diagnostics and trending capabilities.

• 1. Safety Integrity Level (SIL) 2 Suitable
• 2. No calibration required; configuration only
• 3. Available with 4–20 mA and HART® 7 with PACTware™ PC software and the Field Device Tool (FDT); AMS ready
• 4. NAMUR NE 107 diagnostic coverage
• 5. Range spring suppresses effects of turbulence to produce stable output signal
• 6. Full range of hazardous location approvals with international certifications
• 7. Order entire Modulevel or retrofit the latest transmitter onto existing displacer assemblies
• 8. In additional to total level, suitable for interface measurement or specific gravity output

Eclipse® 706 guided wave radar transmitter

The Eclipse® Model 706 high performance transmitter is a loop-powered, 24 VDC level transmitter that is based upon the proven technology of guided wave radar (GWR). Encompassing a number of significant engineering accomplishments, this leading-edge level transmitter is designed to provide measurement performance well beyond that of many of the more traditional technologies.

The ECLIPSE Model 706 transmitter supports both the FDT/DTM and enhanced DD standards, which allows viewing of valuable configuration and diagnostic information such as the echo curve in tools such as PACTware™, AMS Device Manager, and various HART® Field Communicators.

Jupiter® JM4 magnetostrictive level transmitter

The Jupiter® JM4 liquid level transmitter is a loop-powered 24 VDC liquid-level transmitter and is available as a direct insertion transmitter or as an external mounted transmitter onto a Magnetic Level Indicator. It relies on the position of a magnetic float which is designed precisely for the liquid to be measured. This high-accuracy device can be designed for liquid level and/or liquid-liquid interface measurement.

The high safety level of JUPITER is demonstrated by a Safe Failure Fraction > 90 %

• 1. 4-button user interface and graphical LCD display provide enhanced depth of data, indicating on-screen waveforms and troubleshooting tips.
• 2. 4-20 mA output
• 3. Rotatable housing can be dismantled without depressurising 
• 4. the vessel via “Quick connect/disconnect” probe coupling.
• 5. Ergonomic dual compartment enclosure
• 6. Simple set-up and configuration
• 7. Smart Probe Technology
• 8. Easy attachment to an MLI
• 9. Direct insertion for a wide variety of vessels and applications

Eclipse® Model 706 Guided Wave Radar (GWR) transmitter for hygienic applications

The Eclipse Model 706 GWR transmitter is available with a 304 stainless steel single compartment housing designed specifically for use in hygienic applications. This instrument meets the needs and requirements for the wetted and non-wetted materials, process connections and surface finishes of hygienic industries.

The Model 706 is a loop-powered, 24 VDC, level transmitter based upon the revolutionary guided wave radar (GWR) technology. Designed to provide measurement performance well beyond that of many traditional technologies, it offers easy configuration with a graphic LCD and intuitive user interface.

The Eclipse transmitter supports the FDT/DTM standard, and a PACTware™ PC software package allows for additional configuration and trending flexibility.

• 1. Low dielectric measurement capability (εr ≥ 1.2)
• 2. Volumetric output with a 30-point strapping table
• 3. Quick connect/disconnect probe coupling
• 4. Operates in visible vapors and ignores most foams
• 5. IS and Non-Incendive approvals
• 6. Ignores coating buildup

Eclipse® 700 guided wave radar transmitter

The Eclipse® Model 700 Transmitter is a loop-powered, 24 VDC level transmitter that is based upon the proven and accepted technology of Guided Wave Radar (GWR). Encompassing a number of significant engineering accomplishments, this leading-edge level transmitter is designed to provide measurement performance well beyond that of many of the more traditional technologies.

This single transmitter can be used in a wide variety of applications ranging from very light hydrocarbons to water-based media.

One universal Model 700 transmitter can be used and interchanged with several different probe types and offers enhanced reliability as it is certified for use in critical SIL 2/3 hardware safety loops.

The ECLIPSE Model 700 supports both the FDT/DTM and Enhanced DD (EDDL) standards, which allow viewing of valuable configuration and diagnostic information such as the echo curve in tools such as PACTware™, AMS Device Manager, and various HART® Field Communicators.

• Multivariable, two-wire, 24 VDC loop-powered transmitter for level, interface, volume, or flow.
• Level measurement not affected by changing media characteristics.
• No need to move levels for calibration.
• Overfill Capable probes allow for “true level” measurement all the way up to the process seal, without the need for special algorithms.
• 4-button keypad and graphic LCD display allow for convenient viewing of configuration parameters and echo curve.
• Proactive diagnostics advise not only what is wrong, but also offer troubleshooting tips.

Echotel® model 355 two-wire loop-powered ultrasonic non-contact transmitter

Echotel® Model 355 is a loop-powered, non-contact-type ultrasonic transmitter that performs liquid level, volume or open channel flow measurement. HART® communications are offered with a PACTware™ PC program for remote configuration and troubleshooting.

• 1. PACTware PC program using HART Communications for remote configuration, advanced diagnostics, performance trending and troubleshooting
• 2. Menu-driven 4-pushbutton, 2-line x 16 character LCD user interface
• 3. False target rejection for identification of true echo from liquid surface
• 4. Common tank shapes and 20-point custom table for volume measurement
• 5. Resettable and non-resettable 7-digit flow totalizers
• Flume and weir curves for open channel flow measurement, in addition to a 20-point custom table and a generic discharge flow equation

BrightTEK ST9x Wireless IIoT Tank Monitoring System

BrightTEK™ by AMETEK®  is an IIoT solution that provides remote wireless connectivity of Magnetrol®, Orion Instruments®, Drexelbrook®, SWI® and B/W Controls level measurement sensors to the AMETEK LMS cloud-enabled, BrightTEK® web server allowing remote data monitoring and system processing.

• Tank monitoring
  • Large bulk tanks
  • Commercial tanks
  • All shapes and sizes supported
• Trailers and Trucks
  • Optimized routes
  • Maximize driver and asset productivity
  • Eliminate unnecessary and costly stops

BrightTek introduces three cutting-edge uplink options designed to cater to diverse industrial needs:

• ST95 Cellular Uplink:
  A battery-powered cellular uplink providing power and monitoring to sensors in remote locations without the need for wired connections. The ST95 supports up to two 4-20mA sensors and offers compatibility with AT&T® and Verizon® cellular services.
  
  
• ST95 Satelite Uplink Host:
  The ST95 Satellite Uplink Host is a solar-powered cellular uplink designed for connecting level measurement devices. Similar to the ST95 Cellular Uplink Host, it offers the benefits of remote monitoring and features unlimited communication range via the Iridium Satellite Network, eliminating the need for cellular service. The ST95 Satellite Uplink Host can support up to six ST95 clients and is intended for installations in non-hazardous areas.
  
  
• ST90 AC Powered Host:
  Capable of powering and communicating with up to 32 4–20mA sensors, the ST90 is an excellent choice for various industrial applications, offering the same robust features as the ST95 in a compact, rugged design.

Aurora® magnetic level indicator

The Aurora® combines the operating system of a conventional float-based magnetic level indicator (MLI) with the leading-edge Eclipse® guided wave radar transmitter developed for level measurement applications. The result is true level-measurement redundancy in a single-chamber design.

Using a 3" or 4" chamber to house both the Eclipse probe and the MLI float, these devices operate seamlessly to provide continuous electronic guided wave radar measurement and visual indication. There are six basic configuration styles and more than 15 material selections for the Aurora magnetic level indicator.

For the first time ever, the ability to accurately and repeatedly measure ultra low dielectric media, high temperature/high pressure process conditions, and media with shifting and changing dielectric values can be accomplished with Aurora.

Gemini™ magnetic level indicator

The Gemini MLI offers innovative level measurement in a special twin-chamber design. A magnetic float and high-visibility indicator in the primary chamber operate indepently of the Eclipse® Guided Wave Radar transmitter in the secondary chamber. This use of two differing technologies adds a layer of redundancy similar to the Aurora model.

Gemini's magnetic indicator chamber can be equipped with switches and additional transmitters for expanded capability. Isolation vales are also easily implemented between both chambers to provided flexibility while fulfilling periodic maintenance procedures.

Pulsar® Model R80 FMCW 80 GHz radar level transmitter

The Pulsar® Model R80 radar transmitter is the latest generation of Magnetrol® 24 VDC, loop-powered, non-contact radar transmitters. Utilizing Frequency Modulated Continuous Wave (FMCW) radar technology, this transmitter offers enhanced performance, proactive diagnostics, and various configuration wizards to bring simplicity to an often complex technology.

Liquid, Solid and Bulk material level measurement

• Multivariable two-wire, 24 VDC loop-powered transmitter for level, volume, or flow
• Performance not process dependent (changing specific gravity and dielectric have no effect)
• 80 GHz operating frequency offers superior performance, smaller antennas, better accuracy and enhanced resolution
• Antenna designs up to 200°C (+400 °F), -1 to 70 bar (-14.5 to 1000 psi)
• Hygienic antenna with Tri-Clamp connections and 15 Ra surface finish
• Range up to 30 meters (100 feet)
• 4-button keypad and graphic LCD allow for convenience viewing of configuration parameters and echo curve
• Proactive diagnostics advise not only what is wrong but also offer troubleshooting tips

Pulsar® model R96- 6 GHz non-contact radar transmitter

The Pulsar® Model R96 is a loop-powered, 24 VDC, non-contact radar level transmitter. It has a longer measurement range, improved diagnostics and is easier to use than most loop-powered radar transmitters.

• Performance not process dependent (changing specific gravity and dielectric have no effect)
• 6 GHz operating frequency offers superior performance in the tougher applications of turbulence, foam, and heavy vapors
• Antenna designs to +400 °F (+204 °C)
• Range up to 130 feet (40 meters)
• Quick connect/disconnect probe coupling allows vessel to remain sealed
• SIL 2 capable with Safe Failure Fraction (SFF) = 92.7% (FMEDA available upon request)
• PACTware™ PC software interface with new improved DTM.

Pulsar® model R86 26 GHz non-contact radar transmitter

The Pulsar® Model R86 non-contact radar level transmitter is a 24 VDC, liquid level transmitters. It has a longer measurement range, circular polarization, advanced diagnostics and is easier to use than most loop-powered radar transmitters.

Non-contact radar model R82 pulse burst radar transmitter

Radar has been part of the level measurement market for more than thirty years. The early designs used in tank gauging were heavy, expensive, power-hungry and complex. Advancements in radar circuitry have evolved the modern radar transmitter so that now it is light, inexpensive, loop-powered and easy to use. The R82 is the logical extension of that evolution.

Microwave-based radar is a superior measurement technology with its ability to operate effectively in a wide range of process conditions. It has been too expensive to use as a replacement for ultrasonic transmitters in simple, daily applications...until now. The R82 radar transmitter can be considered the answer to almost every daily level measurement application imaginable.

• 24 VDC, loop-power with HART®
• Housing: Lexan® or cast aluminum
• Range: 15" (380 mm) to 40 feet (12 m) measured from process connection
• Antenna: Encapsulated horn - polypropylene or Tefzel®
• Process Temperature: -40 to +200 °F (-40 to +93 °C)
• Process Pressure: Vacuum to 200 psig (-1 to 13.8 bar)

Thermatel® TA2 thermal mass flow meter

The Thermatel® Model TA2 thermal mass flow meter delivers accurate, continuous gas flow measurement for a wide range of industrial applications. Designed for easy installation and long-term reliability, the TA2 is an economical solution for monitoring and controlling gas flow to help manage energy costs and ensure compliance with environmental regulations.

The TA2 minimizes maintenance and downtime while providing dependable performance in challenging process conditions. Its heat transfer–based measurement technology offers exceptional accuracy and repeatability at low gas flow rates and pressures—where traditional differential pressure or mechanical meters may struggle.

Ideal for use in industries such as chemical processing, oil and gas, wastewater treatment, and power generation, the Thermatel® TA2 offers a low total cost of ownership, simple field calibration verification, and proven Magnetrol® quality.

Universal V Level System

The Universal V Series offers worldwide hazardous area approvals including FM, FMc, ATEX & IECEx, standard display/keypad, autoranging capabilities and improved firmware and software for a more reliable measurement.

Pro Model
The Universal V™ Pro model integrates the RF Admittance technology pioneered by Drexelbrook with the versatility of Cote-Shield™ technology that ignores coatings on the probe and measurement span of 1" to 800'. The Pro is compatible with a vast array of applications: conductive, insulating, and heavy or light coating.

Lite Model
The Universal V™ Lite model is the entry level RF Capacitance measurement system without Cote-Shield™ capabilities. Lite models can be used in non-coating conductive liquids and insulated coating applications where Cote-Shield™ is not required. In addition, the Lite model offers a measurement range up to 20' typically.

Universal V - Water Cut Monitor

For more than 50 years, Drexelbrook has been the world leader in capacitive based water cut measurement. We offer the highest pressure and temperature ratings in the industry and our capacitive probes can handle pressures up to 1500 Psi and temperatures up to 450°F.

Our popular Universal V CM Series is a high quality water cut meter, also known as a water cut monitor or BS&W, with a range of 0-50% in light oil and 0-80% in heavy oil.

It is built upon the Drexelbrook expertise in RF Admittance that allows the electronics to ignore paraffin and other coatings that buildup on the probe.

The Universal V CM features a unique Cote Shield that is designed into the Universal IV CM series and enables the instrument to ignore a pre-determined length of the sensing element.

This water cut meter comes with a Perm-A-Seal sensing element that does not require epoxy coatings that wear out and require expensive servicing.

Using this water cut meter together with our HRTWin or new STExplorer PC software field configuration is possible from anywhere along the two wire loop.

The Universal V CM sensing element is selected based on pipe size, wetted parts, NACE requirement and pressure/temperature. Drexelbrook offers a wide range of probes to fit virtually any application required.

All water cut meters features a built-in LCD display and keypad and comes from the factory pre-calibrated and requires only one point validation.

The Universal V CM water cut meter is intrinsically safe and approved for Class I, Div1 hazardous locations.

Water Cut Meter - Density Compensation Module

Drexelbrook offers a Density Compensation Module (DCM) for its Universal IV™ & V In-Line Water Cut Monitors (CM). The module automatically compensates for density changes that may occur in the composition of products and reduces the calibration requirements due to those changes.

The Universal IV & V CMs are designed for high-accuracy water in oil measurement. The DCM allows the Universal IV & V CMs to maintain its stated accuracy with variations in density up to 10 API, ensuring measurement accuracy from load to load regardless of changes in product composition.

The Universal V utilizes an electrical measurement (capacitance) and correlates that to water cut (% of oil in water). Those measurements can be affected by changes in density. Density compensation is done to correct for changes in electrical properties that may impact output measurement and is particularly suitable for midstream refinery and oil pipeline operators.

Along with the optional Density Compensation Module, the Universal V CM features an in-line probe design that allows it to analyze a large representative sample of flowing fluid in real time. Its sensing element extends into the main process line, taking an average of the capacitive property of the fluid over its entire length. That ensures a smoother and more accurate response, regardless of the mixture. The monitor’s onboard electronics then computes the relationship between capacitance change and water cut.